Fiber Cleaning Tissues Box RS-9CT

RS-9CT Fiber Cleaning Tissues – Professional Lint-Free Wipes for Fiber Optic Cleaning

The RS-9CT Fiber Cleaning Tissues are professional-grade, lint-free wipes designed specifically for fiber optic installation, splicing, termination, and connector end-face cleaning. Manufactured from high-quality engineered fabric, these wipes provide superior cleanliness without lint, residue, or fiber damage, ensuring optimal signal performance and long-term reliability.

Each compact dispensing tub contains 90 perforated pop-up wipes, offering fast, controlled access during field or laboratory work. The wipes are strong, soft, and highly absorbent, making them ideal for use with fiber preparation fluids or dry cleaning procedures.

The RS-9CT wipes are perfectly sized for:

• Cleaning bare fibers before termination
• Preparing fibers prior to fusion splicing
• Cleaning connector end-faces after polishing
• Removing dust, oils, and contaminants from delicate glass fibers
• Designed for telecom engineers, fiber technicians, installers, and data center professionals, these wipes resist shredding and pilling while remaining compliant enough to safely clean sensitive fiber surfaces.
• Cleanroom packaged and made for professional fiber optic applications, RS-9CT Fiber Cleaning Tissues are an essential tool for achieving low-loss, high-quality fiber connections every time.

How to Use (Setup Instructions)

• Remove lid and open top of plastic bag.
• Pull fabric end from the inside center loop of the roll.
  To dispense properly, wipes must draw from the inside hole of the roll.
• Thread the end of the first wipe through the center hole in the lid.
• Place lid back on the container.

To Retrieve a Wipe

• Pull straight up until a complete wipe is exposed
  (you will see the perforations).
• Pinch fabric from the next wipe with thumb and then pull sharply at a right angle to break the first wipe free.

Cleaning Fibers Prior to Termination

• For best results use Fiber Preparation Fluid.
• Fold a wipe into a square. Dampen with fiber fluid.
  Position fiber in the fold.
  Wipe the fiber(s) from the buffered section to the bare end of the fiber until the “squeak” of clean is heard.

Cleaning Connector End-Faces After Polishing

• For best results use a good Fiber Preparation Fluid or Connector Cleaner.