No products in the cart.
Great Deals
Super Discount
Items on sale
Top picks this week
NETWORK CABLE TESTER NF-8209 NOYAFA
| Functions | Highlights |
| Locate The Target Cable Quickly | Two scanning modes, analog and digital, can be switched at any time, with an anti-jamming probe, adjustable sensitivity, tone generator, and LED light, so that the receiver can quickly and accurately locate the target cable in a wide variety of complex environments. |
| Ethernet Continuity Test | Analyze CAT5 CAT6 (STP & UTP) line faults, such as normal, open circuit, short circuit, and cross, and see the results instantly. |
| Measure Cable Length Accurately | Measure the network cable in the range of 2.5m-500m. |
| Port Blink Test | Identify the network port by the blinking port light on the Hub or Switch. Available to 10M/100M/1000M Hub/ switch. |
| PoE Testing | Identify which pins are providing power and detect how much voltage, and identify which type of PSE (AT/AF standard) |
| Work Safely | Non-Contact Voltage (NCV) tester detect AC voltage (70V-1000V) without disrupting the electrical system, providing you with maximum safety and convenience. |
| Rechargeable Battery | The network tester can be recharged using a USB-C cable, and the lithium battery provides long-lasting power |
| Other Function | Quality control of the crimping crystal |
Network Cable Tester NF-8209
Port flash – locate network port by the flashing port light on switch or router
POE – Available for standard or non standard POE switch, identify AT or AF standard of PSE Type
Scan – Analog/Digital mode to locate lan cables
Length test: Network cable length breakpoint test, no calibration required
Wire test : Cross, open circuit, short circuit, normal etc.
SKU: 17-10-0004
| smitter | Wiremap | Cable type | CAT5、CAT6 (STP & UTP) |
| Test with switch directly | Yes | ||
| Max range | 600m | ||
| Crimping | Identify response speed | ≤ 1second | |
| Test type | 8 cores | ||
| Min. recognition length | 10cm | ||
| Length | Cable type | CAT5、CAT6 (STP & UTP) | |
| Test range | 2~500m | ||
| Accuracy | ±1.6m | ||
| Breakage location | Yes | ||
| Scan | Cable type | CAT5、CAT6 (STP & UTP) | |
| Max. signal voltage | 5V+/-1.0V p-p(audio file) | ||
| Frequency | 455KHz | ||
| Dual mode to scan cable | AC filter & Non AC filter | ||
| Max range | 600m (RJ45)/ 400m(RJ11) | ||
| POE | Test range | DC 5~60V standard / non-standard PoE switch | |
| Power supply core/Jumper method | End jumper/middle jumper/8-pin power supply/unknown | ||
| PSE type | IEEE 802.3af/at,Non-standard | ||
| Port flash /Link test | Full-duplex/half-duplex recognition | Yes | |
| Auti-negotiation/Non-anto-negotiation | Yes | ||
| Switch type | 10M/100M/1000M | ||
| LCD display | 128*64 Dot-matrix with backlight | ||
| Power supply | 3.7v 1400mAh lithium battery | ||
| Size | 125mm*70mm*32mm | ||
| Auto-off time | 15min、30min、60min、OFF | ||
| Voltage protection | DC48V 5mA | ||
| Max working current | <150mA | ||
| Receiver | Sentivity adjustable | Yes | |
| NCV | AC 70V~1000V 50/60Hz | ||
| Lamp | Yes | ||
| Wiremap | Yes | ||
| Battary type | 3.7v 1400mAh lithium battery | ||
| Size | 198mm*50mm*28mm | ||
| Standby current | <35mA | ||
| Max working current | <280mA | ||
| Other functions | Low pressure tips | 3.5v+/-0.1v | |
| Low power automatic shutdown | 150min/30min/60min/OFF | ||
| Charging method | DC 5V 1A Type-C | ||
| Operating temperature/humidity | 32~122°F (0~50°C）/90% non-condensing | ||
| Storage temperature | 14~122°F (-10~50°C） | ||
You must be logged in to post a review.
Reviews
There are no reviews yet.